Step
6:
Connecting
the
cables
of
the
electrical
system
Unscrew the bottom tray of the controller box to access the
cable connectors.
Connect the throttle cable. Connect the two–pin and the four
‐
pin wire connectors from the throttle
to the two–pin and four
‐
pin connectors from the controller labeled “Throttle.”
Connect the motor. Connect the six
‐
pin connector from the motor to the six
‐
pin connector from the
controller labeled “Motor.” Connect the three wires from the motor to the same colored individual
wires from the controller labeled “Motor.” Slide the clear rubber sleeve (arrow) that covers the metal
connector portion of the wire down the wire to expose the metal. Connect the wires together and
slide the clear rubber sleeve back over the connection. This will insulate the connection as well as
keep the connection together.
Trikke
Tribred Pon
‐
e
Owner's
Manual
V1
10/1/08
11