©1997-2017 Trikdis
10
www.trikdis.com
Ethernet communicator E10Tv2
3.7
Event Summary
Input description
•
To describe input fill in fields: Partition, Contact-ID, Zone No.;
•
Select type of input
(NO, NC, EOL);
•
Enable: report when event occurs (Alarm), report when input line will restore (Restore).
Internal events description
•
To describe internal events select event type (Event or Restore), enter Contact-ID, Partitions
and Zone.
3.8
Firmware update
The communicator firmware can be updated or changed manually. After an update, all the previous
communicator parameters will remain the same.
When writing firmware manually, it can be changed to a newer or older version. To update:
1)
Run TrikdisConfig.
2)
Connect the communicator via USB cable to the computer or connect to the communicator remotely.
If newer firmware version exists, the software will offer to download the newer firmware version file.
3)
Select the menu branch Firmware.
Note: If there is an installed antivirus software on your computer, it might block automatic firmware update
option. In this case, you must reconfigure your antivirus software.
Figure 8. Firmware update window
Figure 7. Event Summary window
