13
PIPEMASTER™ Model PFM816
92-1412 Rev. 150925
6. OPERATION
6.1 TOOL HOLDER HEIGHT ADJUSTMENT
2.Loosen the tool holder retaining
shoulder screw.
1.Loosen the cap
screw of the tool
holder base plate.
This measurement should be .25” higher than
the radius of the I.D. of the pipe minus 2.00”
3.Slide the tool holder
to bring it to the
measured height, if
between gear rack
teeth, go to the next
higher tooth.
4.Set all other tool holders
at the same height
and tighten all
screws.