17
PIPEMASTER™ Model PFM816
92-1412 Rev. 150925
STEP ‘D’ - ADJUSTING THE FACING TOOL HOLDER ASSEMBLY
2.Rotate axial adjustment screw to adjust
the tool holder height. To determine
the height of the tool bit, use the
dimension taken in step ’A’, minus
the ‘J’ bevel radius, minus the land
extension and after adjustment is
done tighten all hex screws.
1.Before any adjustment can be made, all hex screws must be loosened.
(Ref. Only)
Pipe
NOTE: Use the necessary spacers to optimize the use of the Tool Bit Inserts.