11
-
Before you pull the plug off, turn the unit off by using the proper control knob.
-
Cleaning operations should only be performed before having unplugged the unit and always following the
specific instructions.
-
Do not pull the power cord to disconnect the plug.
-
If the product stops operating or filters have been exhausted, contact a service center. Using original
accessories is recommended.
-
Do not use in case of leakage of oil or gas, do not remove the float in the water container.
-
Periodically remove the water collected in the container. Do not drink it for any reason, but use it as
distilled water for irons.
During installation, follow the steps below:
-
Always keep the dehumidifier in an upright position and place it on a stable and level surface.
-
Always ensure a good ventilation: do not obstruct the air grids, leave enough space at both sides of the unit
and clean the filters regularly.
-
Do not place in closets or too small rooms.
-
Use in environments with room temperatures between 5 ° C and 35 ° C.
-
Do not place the product near heaters or heat or exposing it to direct sunlight. Do not use at too low
temperatures to prevent freezing of internal parts.
-
Do not use as a storage shelf for objects.
-
The appliance should not be exposed to adverse weather conditions (such as rain, wind, humidity, frost,
etc...); do not place it on or near open windows.
DESCRIPTION G90072
1. Handle
2. Control panel
3. Filter
4. Air outlet
5. Water container
6. Air inlet grill
7. Wheels
8. Continuous water out spout
9. Power cable
CONTROL PANEL
POWER
: to switch on and off appliance
SWING
: to activate the air outlet deflector
SETTING
: to set humidity desired in the room
TIMER
: to set the 24 hours timer.
SPEED
: to select fan speed
Light “
power
”: Color green, it switches on when product is linked to power supply.
Light “
full
”: Color red, it switches on if the water tank is full or not properly inserted.
Light “
Swing
”: Color green, it switches on if the deflector is moving.
Light “
timer
”: Color green, it switches on when timer is set.
Light “
HI
”: Color green, it indicates that the fan is running at high speed.
Light “
LOW
”: Color green, it indicates that the fan is running at low speed.
DISPLAY
: the 2 numbers display can indicate:
-
Humidity sensed in the room during use
-
Humidity set with button “SETTING”
-
The hours set with TIMER
OPERATING
Before operating the unit, follow installation instructions found on page 11 of this user manual. On first use,
and after having moved the unit, keep off dehumidifier in a vertical position for about 24 hours, so as to settle
oil and gas. During operation, compressor make heat. This can result in a slight increase in room temperature.
-
Make sure that the water tank (5) is empty. Connect the unit to the power outlet. The lamp "Power" on
panel (2) lights on and the display indicates the humidity of the room.
-
Press the button POWER on the panel (2). If the humidity in the room is more than the humidity set, the
appliance switches on. Also the one of the lights “HI” or “LOW” light up, depending on the fan speed
previously set. To change the speed of fan, press the button SPEED.
