PAG.9
X-DJ 13E80 ANC
On button is released before the red and blue light flash, the headset enters power On mode
only, not pairing mode, you need tu turn Off and re-operate the headset);
2. Turn On the bluetooth switch of your phone or other bluetooth device;
3. Search bluetooth pairing name “X-DJ13E80ANC” and click “Connect”;
4. The bluetooth connection status indicator is flashing blue slowly with a success pairing tone;
5. The headset memorizes the current device and it will pair automatically for the second time.
Note:
-
A paired device, it may happen that the connection is interrupted (such as when the devices
connected via Bluetooth stray too far from each other); Normally the connection is automatically
restored, otherwise it is necessary to carry out the procedure again coupling from step 1 to 5.
- Whenever you want to pair your headset to a new device, you must disconnect the headphones
(if connected) from the old device and pairing repeating the above procedure from step 1 to step
5.
- During pairing the two devices must be placed at a distance less than one meter, in normal use,
the maximum distance for a correct operation is about 8 meters.
MUSIC PLAYER AND VOLUME CONTROLS
- Press the Power On button
(2) to Play/Pause Music;
- Press the “+” key (1) to increase the volume;
- Press and hold the “+” key (1) to switch to the next song;
- Press the “-” key (3) to decrease the volume;
- Press and hold “
-” key (3) to switch to the previous song
.
CALL HANDLING ON MOBILE PHONE
Through headphones they can operate various operations while receiving calls on mobile phone:
Answering a call:
When the call is coming, press the power On button
(2) to answer the call
by headset;
Ending a call:
When the call is finished, short press the power On button
(2) to end the call;
Reject an incoming call:
For reject a call, long press the power On button
(2);
Make a call on the last number called:
When the last number is redialled, double tap the power
On button
(2) to call back the last call number on the phone.
WIRED FUNCTION
You can use the HiFi headphones as normal headphones by connecting them via cable to an external
device equipped with a headphone jack via the supplied stereo Jack/Jack cable. For use on an
airplane, connect the stereo Jack/Jack cable to the supplied adapter and connect the adapter to the
headphone jack on the aircraft.
NO ANC
In Power Off mode, put audio cable into the headset audio jack (5) at one end and put the other end
into the phone or other product’s audio output port.
ANC
Turn On the ANC switch, put audio cable into the headset audio jack (5) at one end and put the
other end into the phone or other product’s audio output port.
ENGLISH
Summary of Contents for X-DJ 13E80 ANC
Page 2: ......
