![background image](http://html.mh-extra.com/html/gigaset/sx353-isdn/sx353-isdn_quick-start-manual_2226547001.webp)
How I can connect the Gigaset SX353 ISDN with an mobile phone via Bluetooth
TM
?
At the Gigaset SX353 ISDN: Open the menu and choose
Bluetooth
. Confirm with
OK
.
Now open the menu
Reg.BTdevice
. Confirm with
OK
.
Choose the option
GSM phone
an confirm again with
OK
. Please pay attention, that only one
mobile phone can be registered to the Gigaset SX353 ISDN. Is there already registered one,
and you try to register another one, you get the error message
Reg. procedure canceled
. In
this case you have to de-register the present mobile phone by using the option
De-reg.
BTdevice
.
Confirm the option
Reg.BTdevice
with
OK
. The Gigaset displays
Registration proced.
running
. The Gigaset SX353 stays for
one minute
in this condition.
At the mobile phone (Description example with Siemens S55):
Menu >> Setup >> Select >> Connectivity >> Select >> Bluetooth (please activate) >>
Options >> Search for ... >> Access. >> (the Gigaset SX353 ISDN will be found) >> Select
>> Enter PIN: 0000 (if you did not change it. Otherwise use your personal code) >> OK
By pressing the red call end key you get back to idle mode. Now you will see the bluetooth
connection symbol, the same you see at the Gigaset SX353 ISDN between the date and the
clock display.
The mobile phone connects itself automatically to the SX353 ISDN, if bluetooth is activated.
Note:
A Siemens S55 should contain at least the firmware version 20.
For your Gigaset SX353 ISDN there is a version 26.204 for best Bluetooth
TM
performance.
Summary of Contents for SX353 isdn
Page 2: ......