EC 875
4_
ENGLISH
TOOLTIP
1. SNOOZE button, temporary alarm
off
2. HOUR button, increase in hours
3. MIN button, increase in minutes
4. TIME button, time adjustment
5. ALARM button, alarm adjustment
6. ALARM ON/OFF selector, alarm on/
off
7. Alarm indicator
8. LED display
9. Backup battery compartment
POWER SUPPLY
Plug the cord into any 230V-50Hz AC home outlet. The entire display will flash
until the time won’t set.
CLOCK SETTING
1. Press and hold the TIME button (4) and simultaneously press the HOUR key
(2) to set the hour.
2. Press and hold the TIME button (4) and simultaneously press the MIN key (3)
to set the minutes.
ALARM SETTING AND ACTIVATING
1. Press and hold the ALARM button (5) and simultaneously press the HOUR
button (2) to set the hour of alarm.
2. Press and hold the ALARM button (5) and simultaneously press the MIN
button (3) to set the minutes of alarm.
3. Move the ALARM ON/OFF selector (6) to the ON position to activate the
alarm. The display will turn on the alarm indicator (7).
SNOOZE FUNCTION AND DISABLE ALARM
1. During the alarm sound, press the SNOOZE button (1) to temporarily stop
the alarm. After 9 minutes the alarm will continue to sound.
2. During the alarm sound, press the ALARM button (5) to stop the alarm. The
alarm will remain active and will play 24 hours later.
3. Move the ALARM ON/OFF selector (6) to the OFF position to turn off the
alarm. The display will turn off the alarm indicator (7).
BATTERY BACK-UP
To keep the clock function and alarm recording even during a momentary
man, lacking electricity, insert a 9V battery into the battery compartment (9)
on the bottom of the appliance. We considered the pre-replace this battery
every 6 months.
If in case of interruption of the electrical appliance on a monsters wrong time
and flashing replace the 9V battery.
TECHNICAL CHARACTERISTICS
Power Supply: .................................................... AC 230V-50Hz
Power consumption: ....................................... 2W
TREVI pursues a policy of continuous research and development. Therefore,
the products may show different characteristics from those described.
