Engineering T503F Rev 1.04
2004-12-10
13 of 77
Redial
Try the call again
Outgoing Call
Show outgoing call status screen
Active Call
Show details of any other active calls (if applicable)
Held Call
Show details of any other held calls (if applicable)
Conference
Show details of any existing conference calls (if applicable)
Call Settings
Shortcut to the Call Settings. This is the same screen that is accessible via "Settings"/"Calling" from the
main menu.
Terminating a call
To hang up at the end of the call, press
key
Last Number Redial
Press
to recall the last number dialled, if correct, press
again to dial the number.
You could use the
key to browse the last dialled numbers then press
to make the call.
Emergency Call
z
Your national emergency services numbers are stored in a special memory in the phone to enable the calls to be made
even when the phone is locked, the restrict feature is set or when no SIM is fitted.
z
Ignore any phone/SIM locked or restricted messages and dial as normal. The call should be successful if you are within
network coverage and there is sufficient signal strength
Note: 112 is the international emergency number used in most countries.
Answering Calls
The phone must be switched on to receive calls.
Press
key or
&
to answer the call at any time during the ringing.
z
If the “any key answer” feature has been activated, press any key to answer the call except
or
key.
z
During the ring tone, the caller’s number or name may be displayed (if this is supported by the network).
*
Caller’s name will only be displayed if the caller’s number has been previously stored on the phone book.
Pressing
gives the following options:
Accept
Accept the incoming phone call
Reject
Reject the incoming phone call
Add to phonebook Add this incoming call to your phone book via the "Phonebook Add Entry" screen}. For further info,
please refer to the phone book section of this manual.
Incoming Call
Show incoming call status screen
