manualshive.com logo in svg

TRENDnet TW100-BRV304 SHEETS, User Manual

Share
Download
TRENDnet TW100-BRV304 SHEETS User Manual Download Page 49

Internet Features 

NAT 

Enable NAT 

NAT (Network Address Translation) is the technology which allows 
all PCs on your LAN to share the Internet IP address allocated to the 
WAN port on this Router. From the Internet, all PCs appear to have 
the same IP address.  

For normal operation, this setting must be ENABLED. 

Disable NAT 

Disabling NAT will disable Internet access, unless all PCs have 
valid Internet IP addresses.  

If you wish to use this device for Routing ONLY (and NOT for 
Internet access), then NAT should be disabled. 

DNS 

Automatically 
obtain from 
Server 

The DNS (Domain Name Server) address will be obtained automati-
cally from your ISP's server. Note that if using a fixed IP address, 
with no login (login is set to "None"), then no Server is used, and this 
option cannot be used. 

Use this DNS 

If this option is selected, you must enter the IP address of the DNS 
(Domain Name Server) you wish to use. 

Note:

 If the DNS is unavailable, the "Backup DNS", entered on the 

Internet - Options

 screen, will be used. 

Login 

Login Method 

If your ISP does not use a login method (username, password) for 
Internet access, leave this at the default value "None (Direct connec-
tion)" 

Otherwise, check the documentation from your ISP, select the login 
method used, and enter the required data. 

•

 

PPPoE

 - this is the most common login method, widely used 

with DSL modems. Normally, your ISP will have provided some 
software to connect and login. This software is no longer re-
quired, and should not be used. 

•

 

PPTP

 - this is mainly used in Europe. You need to know the 

PPTP Server address as well as your name and password. 

•

 

Big Pond Cable

 - for Australia only. 

•

 

SingTel RAS

 - for Singapore only. 

Login User Name 

The User Name (or account name) provided by your ISP.  

Login Password 

Enter the password for the login name above. 

RAS Plan 

For SingTel customers only, select the RAS plan you are on. 

Server Address 

If using PPTP or Big Pond Cable, enter the address of your ISP's 
server.  

For PPPoE or SingTel RAS, the Server address in not required. 

Connection 
behavior 

Select the desired option:  

•

 

Automatic Connect/Disconnect

  

An Internet connection is automatically made when required, 
and disconnected when idle for the time period specified by the 
"Auto-disconnect Idle Time-out".  

45 

Summary of Contents for TW100-BRV304 SHEETS






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands