Microsoft VPN
Upload Certificate
After you have received a Certificate, use this to upload the certifi-
cate to the Broadband VPN Router.
You must select the correct certificate request, so the Broadband
VPN Router can correctly match the request and the certificate.
New Request
Button
Use this to generate a new request to be supplied to a CA (Certifica-
tion Authority). See the following section for details.
Requesting a Self Certificate
The TW100-BRV304 must generate a request for the CA. This request must then be supplied
to the CA. The procedure is as follows:
1.
On the
Self Certificates
screen, click the
New Request
button to view the first screen of the
Self Certificate Request
procedure, shown below.
Figure 89: Self Certificate Request (1)
2.
Complete this screen.
Name
Enter a name which helps to identify this particular certifi-
cate. This name is only for your reference, it is not visible to
other people.
Subject Name
This is the name which other organizations will see as the
Holder (owner) of this Certificate. This should be your
registered business name or official company name. Gener-
ally, all Certificates should have the same value in the
Subject field.
Hash Algorithm
Select the desired option.
Signature Algorithm
Select the desired option. RSA is recommended.
Signature Key Length
Select the desired option. Normally, 1024 bits provides
adequate security.
IP address
Enter your public (Internet) IP address.
Domain Name
This is optional. If you have a domain name, enter it here.
E-mail Address
This is optional. If you have permanent E-mail address,
enter it here.
3.
Click "Next" to continue to the following screen.
107
Summary of Contents for TW100-BRV304 SHEETS
