manualshive.com logo in svg

TRENDnet TW100-BRV304 SHEETS, User Manual

Share
Download
TRENDnet TW100-BRV304 SHEETS User Manual Download Page 44

TW100-BRV304 User's Guide 

Address allocated by the DHCP Server will expire. The lease is 
automatically renewed on expiry; use the "Renew" button if you wish 
to manually renew the lease immediately. 

Buttons 

Release/Renew 

Button will display 
EITHER  
"Release" 
OR 
"Renew" 

This button is only useful if the IP address shown above is allocated 
automatically on connection. (Dynamic IP address). If you have a 
Fixed (Static) IP address, this button has no effect.  

•

 

If the ISP's DHCP Server has NOT allocated an IP Address for 
the TW100-BRV304, this button will say "Renew". Clicking the 
"Renew" button will attempt to re-establish the connection and 
obtain an IP Address from the ISP's DHCP Server. 

•

 

If an IP Address has been allocated to the TW100-BRV304 (by 
the ISP's DHCP Server), this button will say "Release". Clicking 
the "Release" button will break the connection and release the IP 
Address. 

Refresh 

Update the data shown on screen. 

 

40 

Summary of Contents for TW100-BRV304 SHEETS






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands