TRENDnet TW100-BRV304 SHEETS, User Manual

Page: 48 / 149

TW100-BRV304 User's Guide
WAN Port Configuration
The WAN Port Configuration screen provides an alternative to using the Wizard. It can be
accessed from the
Internet menu. An example screen is shown below.
Figure 26: WAN Port Configuration Screen
Data – WAN Port Configuration Screen
Identification
Hostname
Normally, there is no need to change the default name, but if your
ISP requests that you use a particular “Hostname”, enter it here.
Domain name If your ISP provided a domain name, enter it here. Otherwise, this
may be left blank.
MAC Address Also called Network Adapter Address or Physical Address. This is a
low-level identifier, as seen from the WAN port.
Normally there is no need to change this, but some ISPs require a
particular value, often that of the PC initially used for Internet access.
You can use the Copy from PC button to copy your PC's address into
this field, the Default button to insert the default value, or enter a
value directly.
IP Address
IP Address
is assigned auto-
matically Also called Dynamic IP Address . This is the default, and the most
common.
Leave this selected if your ISP allocates an IP Address to the
TW100-BRV304 upon connection.
Specified
IP Address Also called Static IP Address . Select this if your ISP has allocated
you a fixed IP Address. If this option is selected, the following data
must be entered.
•
IP Address .
The IP Address allocated by the ISP.
•
Network Mask (Not required for PPPoE)
This is also supplied by your ISP. It must be compatible with the
IP Address above.
•
Gateway IP Address (Not required for PPPoE)
The address of the router or gateway, as supplied by your ISP.
44