TRENDnet TV-IP344PI, User Manual, Page: 26 / 39

© Copyright 2017 TRENDnet. All Rights Reserved.
24
TRENDnet User’s Guide
Limited Warranty

Brightness, Contrast, Hue, Saturation, Sharpness can be adjusted here.

AGC : Automatic gain control. The sensitivity of camera can be adjusted with the
environmental light. Enable this function and the brighter image can be got under
dim light, but the level of noise may also increase.

Shutter Time : Choose as the location of your camera or fixed shutter time. The
shorter the shutter time is, the less light the camera receives and the image becomes
darker.
Note: When you select a number in "Shutter Time", actually the shutter time varies in a
range and controlled by camera automatically. Following table shows the shutter time
option and corresponding range.
Option Shutter Time Range (sec.)
Outdoor 1/10000 ~ Selected number in "Sense‐up"
Indoor NTSC: 1/125 ~ Selected number in "Sense‐up"
PAL: 1/100 ~ Selected number in "Sense‐up"
1/30 1/10000 ~ 1/30
1/50 1/10000 ~ 1/50
1/60 1/10000 ~ 1/60
1/100 1/10000 ~ 1/100
1/125 1/10000 ~ 1/125
1/250 1/10000 ~ 1/250
1/500 1/10000 ~ 1/500
1/1000 1/10000 ~ 1/1000
* Sense‐up options: 1/30, 1/15, 1/10, 1/5

Sense‐Up : This function increases the sensitivity of camera to get brighter image at
night. The smaller the value you select, the slower the shutter speed becomes so that
the image will get brighter, and moving subjects might be blurred.
Sense‐Up option is only enabled when users select "outdoor" or "indoor" in shutter
time option.

D‐WDR : Digital Wide dynamic range. This function enables the camera to reduce the
contrast in the view to avoid the dark zones resulting from over and under exposure.

Video Orientation : Flip, mirror, or rotate the image.

Day & Night : The camera can detect the light level of environment. If you choose
"Light Sensor Mode", the image will be turned to black and white at night in order to
keep clear. To set light sensor mode, appoint a lux standard of switching D/N here.
Current lux value is provided for reference. Under "Times Mode" the switch time of
Color / Black and white is according to the given time. If you select "Synchronize with
DI input", the image turns to black and white when digital input is triggered. You can
also control it by choosing "Color" or "B/W".