TRENDnet TV-IP344PI, User Manual, Page: 15 / 39

© Copyright 2017 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide
Limited Warranty
Network >> Network Setting >> Web Authentication
The camera supports two levels of authentication, Basic and Digest. The Basic option
having the username and password transmitted as plain text. The digest option
encrypted username and password during data transmission. The default authentication
is set to Digest.
Network >> Network Setting >> UPnP

UPnP:
This IP camera supports UPnP (Universal Plug and Play) which is a set of computer
network protocols that enable the device to device interoperability

UPnP Port Forwarding:
When the camera is installed under a router, enable UPnP Port Forwarding to let the
router open ports so that the video streams can be sent out from a LAN. Set Web
Port, Https Port, and RTSP port, and make sure your router supports UPnP and the
function has been activated.
After type in the port number and click "Apply", the port forwarding status will
display beside the port column. There are three status will show.
-
Registered successfully: UPnP port forwarding setting succeeds.
-
The router doesn't support UPnP Port Forwarding: The camera can detect the
router, but router return a message that it does not support UPnP Port
Forwarding.
- The router is with some problems. Please reboot it: The camera cannot detect
the router. Please check your router.
If this router has a WAN IP, this function allows the camera to do WAN access. In the
address bar of browser, key in: "https:// (router WAN IP): (external web port) /" to
access the IP camera.
Network >> Network Setting >> RTSP Setting

RTSP Server :
Enable it, then you can access camera and get image via RTSP protocol.
If you have a media player that supports RTSP protocol, you can use it to receive the
video streaming from IP camera. The RTSP address can be set for two streamings
respectively.

RTSP Authentication :
"Disable" means everyone who knows your camera IP Address can link to your
camera via RTSP. No username and password are required.
Under "Basic" and "Digest" authentication mode, the camera asks the user to give
username and password before allows accessing. The password is transmitted as
plain text under basic mode, which provides a lower level of security than under
digest mode. Make sure your media player supports the authentication schemes.

RTSP Port : It's used for TCP connection. Setup port for RTSP transmitting (Default:
554)

RTSP Start and End Port : It's used for UDP connection. Setup port for RTSP
transmitting (Default: 5000, 9000)