
© Copyright 2017 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide
Limited Warranty
4.
According to the certificate source, there are two ways to install the certificate.
-
If you had sent the certificate request to do sign and received a signed certificate,
please click” browse” and find the certificate file in your computer. Click “Apply”
to install it.
-
If you choose to generate a self‐signed certificate, fill in the following forms and
set validity day, click “Apply” to finish installed it.
After finishing installation, you can click “Content” to call out and check the certificate
content.
5.
To use Https to access camera, open your browser, and key in "https://(IP address)/"
in the address bar. Now your data will be transmitted via encrypted communications,
and the browser will check your certificate status. If it shows you a warning message.
The warning message meant that the certificate is self‐signed or signed by distrusted
institution. Click
Continue to this website
to view the view the camera.
Network >> Advanced >> SNMP
SNMP (Simple Network Management Protocol) provides a simple framework for
administering networked hardware. To manage the IP camera, you have to prepare a MIB
browser or similar tools first. SNMPv1, SNMPv2c, and SNMPv3 can be enabled
simultaneously.
The following examples are based on MG‐ SOFT MIB Browser. Depending on your MIS
Browser, you may see different interface and options. Please refer to the user manual of
your MIB Browser.
SNMPv1 and SNMPv2:
The term "Community name" in SNMPv1 and SNMPv2c can be roughly regarded as
key. The person who has the community name has the authority to read or edit the
information of IP camera via SNMP.
Summary of Contents for TV-IP344PI
Page 1: ...TRENDnet User s Guide Cover Page ...
Page 39: ......