TRENDnet TEW-657BRM User Manual Download Page 81

Page: 81 / 109

Logs

The Logs record various types of activity on the Wireless ADSL Router. This data is useful for
troubleshooting, but enabling all logs will generate a large amount of data and adversely affect
performance.

Since only a limited amount of log data can be stored in the Wireless ADSL Router, log data
can also be E-mailed to your PC. Use the

E-mail

screen to configure this feature.

Data - Logs Screen

Logs

Current Time

The current time on the Wireless ADSL Router is displayed.

Log Data

Current log data is displayed in this panel.

Buttons

There are three (3) buttons

•

Refresh

- Update the log data.

•

Clear Log

- Clear the log, and restart it. This makes new

messages easier to read.

•

Send Log

- E-mail the log immediately. This is only func-

tional if the

E-mail

screen has been configured.

Summary of Contents for TEW-657BRM














































































































Search results

Summary of Contents for TEW-657BRM

Reviews:

Related manuals for TEW-657BRM

Brands by name

Popular brands

TRENDnet TEW-657BRM, User Manual

Search results

Summary of Contents for TEW-657BRM

Reviews:

Related manuals for TEW-657BRM

Brands by name

Popular brands