If you can't connect
If the Wireless ADSL Router does not respond, check the following:
•
The Wireless ADSL Router is properly installed, LAN connection is OK, and
it is powered ON. You can test the connection by using the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.10.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the Wireless ADSL Router's IP
Address. (See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.10.2 to 192.168.10.254 to be compatible with the Wireless ADSL
Router's default IP Address of 192.168.10.1. Also, the
Network Mask
must be
set to 255.255.255.0. See
Chapter 4 - PC Configuration
for details on check-
ing your PC's TCP/IP settings.
•
Ensure that your PC and the Wireless ADSL Router are on the same network
segment. (If you don't have a router, this must be the case.)
•
Ensure you are using the wired LAN interface. The Wireless interface can only
be used if its configuration matches your PC's wireless settings.
Setup Wizard
The first time you connect to the Wireless ADSL Router, you should run the
Setup Wizard
to
configure the ADSL and Internet Connection.
1.
Click the
Setup Wizard
link on the main menu and click “Next”.
2.
On the below screen, select
Auto-detect
or
Manual Selection
, then click "Next"
Summary of Contents for TEW-657BRM
Page 1: ...i ...
Page 25: ...Click OK to establish a connection to the Wireless ADSL Router 22 ...
Page 86: ......
Page 109: ...106 ...
