TRENDnet TEW-657BRM User Manual Download Page 74

Page: 74 / 109

Category

•

Normal-Applications:

•

Add a New Application (Once selected, please complete the

following setups.)

•

Ip/Net: Enter the IP addresses.

•

Outbound Rate: Enter the desired rate value.

•

Inbound Rate: Enter the desired rate value.

•

Priority: Select the desired option (High, Normal, Low)

•

Self-Define

•

Name. Enter a name for your device.

•

Port Range: Enter the values for the desired port range.

•

Protocol: Select the desired option.

•

Ip/Net: Enter the IP addresses of your device.

•

Outbound Rate: Enter the desired rate value.

•

Inbound Rate: Enter the desired rate value.

•

Priority: Select the option (High, Normal, Low) from the list.

•

Special-Applications:

•

Add a New Application (Once selected, please complete the

following setups.)

•

Ip/Net: Enter the IP addresses.

•

Outbound Rate: Enter the desired rate value.

•

Inbound Rate: Enter the desired rate value.

•

Priority: Select the desired option (High, Normal, Low)

Summary

Priority

The priority of the application.

Name

The Name of this Application or IP Address.

Information

The general Information of this Application or IP Address.

Summary of Contents for TEW-657BRM














































































































Search results

Summary of Contents for TEW-657BRM

Reviews:

Related manuals for TEW-657BRM

Brands by name

Popular brands

TRENDnet TEW-657BRM, User Manual

Search results

Summary of Contents for TEW-657BRM

Reviews:

Related manuals for TEW-657BRM

Brands by name

Popular brands