manualshive.com logo in svg

TRENDnet TEW-657BRM, User Manual, Page: 7 / 109

Share
Download
TRENDnet TEW-657BRM User Manual Download Page 7

 

Physical Details 

 

Front-mounted LEDs 

 

WPS Button 

Push the WPS button on the device and your other wireless device to 
perform WPS function that easily creates an encryption-secured wireless 
connection automatically. 

When WPS button is pressed, the LED will start blinking for 2 minutes. If 
any client is associated with the router successfully within 2 minutes, the 
LED will stay On, otherwise the LED will be Off. 

Power LED 
(Orange) 

On  

- Power on. 

Off

 - No power. 

LAN (Blue) 

On

 - The LAN port is active. 

Off

 - No active connection on the LAN (Ethernet) port. 

Flashing

 - Data is being transmitted or received via the corresponding 

LAN port. 

WLAN (Blue)  On

 - 

When wireless client have connected

 

Off

 - No Wireless connections currently exist. 

Flashing

 - Data is being transmitted or received via the Wireless access 

point. This includes "network traffic" as well as user data.

 

ADSL 
(Green) 

On

 - ADSL connection established. 

Off

 - No ADSL connection currently exists. 

Flashing 

- ADSL is synchronizing. 

Internet 
(Blue/Yellow) 

On (Blue) - 

Internet connection is available.

 

Off - 

No Internet connection available. 

Flashing (Blue) - 

Data is being transmitted or received via the ADSL 

connection.

 

 

4 

 

Summary of Contents for TEW-657BRM














































































































Reviews:

No comments