manualshive.com logo in svg

TRENDnet TEW-657BRM, User Manual, Page: 10 / 109

Share
Download
TRENDnet TEW-657BRM User Manual Download Page 10

 

PC Configuration 

Overview 

For each PC, the following may need to be configured: 

•

 

TCP/IP network settings 

•

 

Internet Access configuration 

•

 

Wireless configuration 

Windows Clients 

This section describes how to configure Windows clients for Internet access via the Wireless 
ADSL Router. 

The first step is to check the PC's TCP/IP settings.  

The Wireless ADSL Router uses the TCP/IP network protocol for all functions, so it is essen-
tial that the TCP/IP protocol be installed and configured on each PC. 

TCP/IP Settings - Overview 

If using the default Wireless ADSL Router settings, and the default Win-
dows TCP/IP settings, no changes need to be made. 

 

•

 

By default, the Wireless ADSL Router will act as a DHCP Server, automatically providing 
a suitable IP Address (and related information) to each PC when the PC boots. 

•

 

For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP 
client. 

If using a Fixed (specified) IP address, the following changes are re-
quired: 

•

 

The 

Gateway

 must be set to the IP address of the Wireless ADSL Router 

•

 

The 

DNS

 should be set to the address provided by your ISP. 

 

 

If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Ad-
vanced Setup for details. 

 

Summary of Contents for TEW-657BRM














































































































Reviews:

No comments