10/100 Fast Ethernet Switch User’s Guide
Identifying External Components
15
Figure 6, Rear panel view of the TE100-S88 switch
♦
System Fan.
This fan is used to circulate air inside the
Switch and also to dissipate heat. The sides of the system
also provide heat vents to serve the same purpose. Leave
adequate space at the rear and sides of the Switch for proper
ventilation and do not block these openings. Please note that
without proper heat dissipation and air circulation, system
components might overheat, which could lead to system
failure.
♦
AC Power Connector.
This is a three-pronged connector
that supports the power cord. Plug the female connector of
the power cord into this connector, and the male connector
into a power outlet. Supported input voltages range from
100 ~ 240 VAC at 50 ~ 60 Hz.
♦
Power Switch. (TE100-S88 only)
This turns the Switch
on and off. To turn on the system, press the switch to the “1”
position. To turn the power off, press the switch to the “0”
position. Please note that on the TE100-S44, the power
switch is not provided.