10/100 Fast Ethernet Switch User’s Guide
Introduction
3
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which were characterized
by higher latencies. Routers have also been used to segment local
area networks, but the cost and the setup and maintenance
requirements make routers relatively impractical. Today’s
switches are an ideal solution to most local area network
congestion problems.
Features
The Switches were designed for easy installation and high
performance in an environment where traffic on the network and
the number of users increase continuously.
The Switches with their small, compact size were specifically
designed for small to large workgroups (the 4-port switch for
smaller workgroups and the 8-port for larger workgroups). These
Switches can be installed where space is limited; moreover, they
provide immediate access to a rapidly growing network through a
wide range of user-reliable functions.
The Switches are ideal for deployment with multiple high-speed
servers for shared bandwidth 10 Mbps or 100 Mbps workgroups.
In 200 Mbps full-duplex mode, any port can provide workstations
with a congestion-free data pipe for simultaneous access to the
server.
The Switches are expandable by cascading two or more switches
together. As all ports support 200 Mbps full duplex, the Switches
can be cascaded from any port and to any number of switches.
The Switches are a perfect choice for site planning to upgrade to
Fast Ethernet in the future. Ethernet workgroups can connect to
the Switches now, and change adapters and hubs anytime later