10/100 Fast Ethernet Switch User’s Guide
Unpacking and Setup
7
Setup
The setup of the Switch can be performed using the following
steps:
♦
Make sure that the surface supports at least 1.2 Kg for the
TE100-S44 and 2.5 KG for the TE100-S88.
♦
The power outlet should be within 1.82 meters (6 feet) of the
device.
♦
Make sure that the power cord is securely plugged into the
AC power connector.
♦
Ensure that there is proper heat dissipation from and
adequate ventilation around the Switch. Do not place heavy
objects on the Switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber pads
included with the device must be attached first. Attach these
cushioning pads on the bottom at each corner of the device. Allow
enough ventilation space between the device and the objects
around it.