10/100 Fast Ethernet Switch User’s Guide
Unpacking and Setup
9
♦
Drill two 2” deep holes on the wall. The distance between the
holes should be the same as the screw support holes located
on the bottom of the Switch.
♦
Insert the plastic anchors into the holes in the wall and
secure them with gentle taps of a hammer.
♦
Screw in the screws provided with the wall mount kit into
the plastic anchors. Please note that the screw’s head along
with a small portion (1/8”) of the screw’s body should be
sticking out.
♦
Gently, place the Switch on the wall with the front panel
facing up or down. Align the holes on the bottom of the
Switch to the screws and mount the Switch on the wall by
sliding the slots into the screws.
♦
Make all power and network connections at this time, see
Connecting the Switch
.
Rack Installation (TE100-S88)
The TE100-S88 can be mounted in an EIA standard size, 19-inch
rack, which can be placed in a wiring closet with other equipment.
The mounting brackets for the TE100-S88 are an optional
item and must be purchased separately from your local re-
seller.
To install, attach the mounting brackets on the switch’s
front panel (one on each side) and secure them with the screws
provided.