manualshive.com logo in svg

TRENDnet TE100-MP1U - Multi-Function Print Server, User Manual

Share
Download
TRENDnet TE100-MP1U - Multi-Function Print Server User Manual Download Page 46

 
 

 
 

46

 

Chapter6   File  Server 

 

This chapter describes the file server function of the Server which allows USB storage 

devices to be shared across a network by using SMB: NetBIOS over TCP/IP and FTP 
protocol. 
 

6.1

 

Preliminary 

 

1.

 

This product supports a file format of FAT12/16/32 and NTFS. However, the 
“write” operation on NTFS is only supported in NetUSB mode. Please refer to 
the Storage Access Mode. 
 

2.

 

TRENDnet is not responsible for the loss or corruption of data in memory 
devices, including hard disk; TRENDnet is not responsible for the leak, 
manipulation, loss, or corruption of data in memory devices connected to the 

Server after unauthorized access.   

 

3.

 

In order to use the USB Mass Storage device connected to the Server, the SMB 
protocol or FTP protocol must be set up.   

 

4.

 

This product does not support to magnet optical drive devices such as CD/DVD. 

 

   

5.

 

This product allows shared two USB storage devices over the network in 
Windows through the USB ports.   

 
6.

 

This product does not support the USB devices through USB hub.     

 

6.2 Storage 

Names 

 

The local drives of the two storages in USB1 port and USB2 port are named as 
USBx_DxPx, where USBx represents the USBx port, Dx represents the the x-th Disk 

and Px represents the x-th partition.   
 

6.3 

Connecting USB Mass Storage to the Server 

 

Summary of Contents for TE100-MP1U - Multi-Function Print Server




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands