manualshive.com logo in svg

TrendCommunications AuroraPlus, User Manual, Page: 153 / 226

Share
Download
TrendCommunications AuroraPlus User Manual Download Page 153

Test Functions

Issue 5 - 04/01

      5-33

Press 

ENTER 

to exit the Status Request screens.

Notes

•

If no facilities are set 

Nofac 

is displayed.

•

Rejected 

is displayed if the network does not respond.

Tip

You can also access the Status Request option by selecting

STATUS

/

STATUS ENQ

 from the Main Menu.

Displaying Far End Block Errors/Near End

Block Errors (FEBE/NEBE)

When using the 2B1Q-interface, the internal error counters
of the U Interface circuit can be displayed.

Far End Block Errors (FEBE) indicate errors in the 

Transmit

direction. Near End Block Errors (NEBE) indicate errors in
the 

Receive

 direction.

Press 

SHIFT

+

0

.

If no call has been connected since you switched on

Aurora

Plus

, counts for NEBE and FEBE are displayed.

If a call is connected, or has been connected since you
switched on 

Aurora

Plus

 

the following screen is displayed:

B1 CALL INFO

1 CPN

2 COL

3 CHARGE

Chap05.P65

01/05/01, 09:13

33

Summary of Contents for AuroraPlus



































































































































































































































Reviews:

No comments