manualshive.com logo in svg

TrendCommunications AuroraPlus, User Manual, Page: 152 / 226

Share
Download
TrendCommunications AuroraPlus User Manual Download Page 152

Trend 

Aurora

Plus

 User Guide

5-32

              429850

•

CALL REDIR

 is displayed, together with the call

forwarding number, if AWS2 is active.

•

MCI 

is shown if Malicious Call Identification is

currently activated.

•

CUG 

is displayed if a Closed User Group is activated.

•

CHARGING 

is shown if Call Charging is active.

•

BLOCK 

is displayed if any call barring settings are active

on the line. The following table explains the call
barring codes which may be displayed.

Choose 

CALLS

/

SUPP SVCS

/

CALL FWD

 from the Main Menu.

Choose 

STATUS

. After a short delay, while 

Aurora

Plus

 checks

the network, a screen similar to the following is displayed:

Press 

SCROLL

 repeatedly to display all the active facilities

on the line.

Chap05.P65

01/05/01, 09:13

32

Summary of Contents for AuroraPlus



































































































































































































































Reviews:

No comments