manualshive.com logo in svg

TrendCommunications AuroraPlus, User Manual, Page: 147 / 226

Share
Download
TrendCommunications AuroraPlus User Manual Download Page 147

Test Functions

Issue 5 - 04/01

      5-27

Now switch 

Aurora

Plus

 

on. 

Aurora

Plus

 sends information to the

PC and a screen similar to the following is displayed:

Installing New Software

Trend Communications Ltd. provides new software via the
Internet (www.trendcomms.com). To download new
software you need to copy the appropriate file to the PC
running the TrendSend application:

Copy the file containing the new software into the

TrendSend\transfer

 directory on the PC - the file must be

called 

Pluscode.hex

 so rename it if necessary.

Connect 

Aurora

Plus

 to the PC, as described in the previous

section.

To start downloading the software, display the 

Send 

menu

application and choose 

Plus

.

Chap05.P65

01/05/01, 09:13

27

Summary of Contents for AuroraPlus



































































































































































































































Reviews:

No comments