ZPHA Installation Guide
9
Figure 2-9
ZPHA device to IPS device connection diagram (fiber)
NOTE:
You must connect all cables according to segment. All IPS/TPS device segment
ports should be connected to the ports of one segment on the ZPHA device.
Connect copper cables
1.
Connect the RJ-45 copper cables to route network traffic through the ZPHA device to the
IPS/TPS device:
•
Connect a cable from port A of the IPS/TPS device to port A of the ZPHA device segment.
•
Connect a cable from port B of the IPS/TPS device to port B of the ZPHA device segment.
2.
Connect the RJ-45 copper cables to route traffic through the ZPHA device ports to your
network.
•
Connect the cable for incoming traffic to port NET A on the ZPHA device.
•
Connect the cable for outgoing traffic to port NET B on the ZPHA device.
See the following diagram.
