Trek DOMANE SLR 2017, Service Manual

Page: 18 / 28

5 INSTALLING THE SHIFT CABLES
6.
Create the correct amount of slack in the cable
housing: do not make it too loose (A) or too
tight (B).
A B
TOO
TIGHT
TOO
LOOSE
7.
The cable housing should have enough slack to
enable the handlebars to fully turn without pulling
out of the down tube cable housing stop.
8.
Mark the point at which the cable housing enters
the down tube using your thumbnail or marker.
9.
Cut the cable housing at this mark. Clean the cable
housing end and install a cable stop.
10.
Thread a shift cable through the housing and
follow the shifter-specific instructions.
11.
Repeat steps 1 - 10 to install the front derailleur
cable. During this task, install a front derailleur
inline barrel adjuster on the housing. Ensure
that it does not make contact with the frame.
14