Trek DOMANE SLR 2017, Service Manual

Page: 21 / 28

TOOLS AND MATERIALS REQUIRED
• 4 mm Allen key
• 3 mm Allen key
• 8 mm open-ended
spanner
• Eye-bolt
• Hardware included
with mudguard
Securing the rear mudguard
1.
Remove the rear wheel. Remove the hidden
mudguard mount set screws from the junction
of the chainstay and seatstay (1a). Install the
hidden mudguard mount eye-bolts with locking
nuts until they bottom out (1b).
1a
1b
2.
Orient the eye-bolt parallel to the frame. Lock the
eye-bolt in place by tightening the nut with an
8 mm open-ended spanner.
8
mm
TIP
Disc-brake-equipped bikes require the use of a seatstay
bridge adapter. If there are two adapters, Domane uses
the larger one with the longer fasteners.
3.
Pass the mudguard through the rear brake (1a)
and slide the bracket onto the mudguard until you
reach the brake arch or seatstay bridge adapter.
(1b) Secure the bracket with a screw (1c).
Do not
fully tighten.
1a
1b
1c
4.
Install the lower mounting struts of the mudguards
to the eye-bolts. Tighten to a maximum of 5.2 Nm.
N m
5.2
6 INSTALLING MUDGUARDS
17