2022 Session Service Manual
11
Adjust the progression
The shock Mino Link chip can be flipped to fine tune the shock performance for the terrain or rider preference.
20% progression (softer)
25% progression (firmer)
Position the Mino Link chip with 20% on top
• More reactive to repeated fast mid-size bumps and
square-edge hits
Position the Mino Link chip with 25% on top
• More bottom out resistance over big hits and drops
Tools
• 6mm hex tool
• Torque wrench with 6mm hex bit
1. Make sure the Mino Links on the rocker plates are in the low position.
For instructions, see the
Adjust the geometry section on page 6.
2. Remove the lower shock bolt. For the location, see the
Shock mounts section on page 10.
3. Flip the shock Mino Link chip to the desired position.
4. Re-install the lower shock bolt and torque to 10Nm.
