2022 Session Service Manual
7
Main pivot
1
2
3
4
3
2
5
Item Description
Quantity in
Assembly
Part Number Torque (Nm)
1
Axle
1
5256639
30
2
Spacer
2
W440921
—
3
Bearing
2
W302025"
—
4
Sleeve
1
5256639
—
5
Nut
1
W584134
—
Tools
• Bearing press
• 8mm hex tool
• Torque wrench with 8mm hex bit
• Grease
1.
Press in the driveside bearing (3).
2.
Insert the sleeve (4) from the non-drive side.
3.
Press in the non-driveside bearing (3).
Tip:
The sleeve and bearing must be properly aligned to
allow the axle to pass through. To aid in alignment, use the
bearing press to hold the sleeve in position while pressing
in the bearing.
4. Install one spacer (2) over the non-driveside bearing (3).
5.
Apply grease to the shoulder of the axle (1).
6.
Insert the axle (1) from the non-drive side.
7.
Install the other spacer (2) over the driveside bearing.
8.
Install the nut (5).
9.
Torque the axle to 30Nm.
