2021 E-Caliber Service Manual
4
Rear triangle and chainstay bridge
1
3
2
4
4
5
Item Description
Quantity in
Assembly
Part Number Torque (Nm)
1
Rear IsoStrut axle
1
591626
10
2
End cap bolt
1
—
3
Front IsoStrut bolt and washer
2
W584485
5
4
Chainstay bridge bolt
4
5265697
8
5
Chainstay bridge, charcoal colour
1
5266755
—
Tools
• Bike repair stand
•
Torque wrench with 6 mm hex bit, T25 and T30
Torx bits
• Grease
Important:
You must have the main pivot bearing and
sleeve (See the
) and the
on the rear triangle before attaching the rear triangle to
the frame.
1. Put the seat post into a bike repair stand.
2. Fit the rear triangle into the main frame.
3. Install the two front IsoStrut bolts and washers (3).
Important:
Do not torque the bolts at this time.
4.
Apply grease
to the IsoStrut rear axle (1).
5. Install the IsoStrut rear axle (1) and end cap bolt (2).
Important:
Do not torque the bolts at this time.
6.
Apply grease to the flat surfaces of the chainstay
bridge (5).
