Greater than
0 degrees
Less than
30 degrees
Big
Big
Rear Derailleur Cage (RD3)
SRAM RED / FORCE / RIVAL / APEX (2x11 versions)
RIDEA GROUP Limited
www.rideabikes.com
[email protected]
TEL: +886 4 7715639
FAX: +886 4 7720539
Best position after installation
3
rd
Edition April 2019
@CyclingRidea
Congratulations, your RD3 C35/C60
OSPW
+
system is now installed!
Note
: Due to the variability of rear derailleurs on the market, your
OSPW
+
is provided with two groups of tension holes: A-B (A for
higher tension and B for lower tension) and C-D (C for higher
tension and D for lower tension). The correct choice between
A-B or C-D will depend on your rear derailleur model and its
production year.
Included accessories:
RD W15 (included): On some frames with slim rear dropouts, the
shifting performance on the higher gears (smaller sprockets) can
be sup-optimal after you upgrade your derailleur with Ridea’s
OSPW
+
. To solve this, some users may require installing RD W15
washer between the rear derailleur body and the rear derailleur
hanger of the frame.
9
This installation manual is suitable for Ridea
OSPW
+
RD3 C35/C60 rear derailleur cage
OSPW
+
OverSized Pulley Wheel System
+
Greater than
10 degrees
Less than
30 degrees
Small
Small
A
B
C
D