2021 E-Caliber Service Manual
6
Main pivot
1
2 3
4
3
2
5
Item Description
Quantity in
Assembly
Part Number Torque (Nm)
1
Main pivot nut
1
W584134
—
2
Washer
2
W440921
—
3
Main pivot bearing
2
W302025"
—
4
Main pivot sleeve
1
W600642
—
5
Main pivot bolt
1
W600628
30
Tools
• Bearing press
•
8mm hex tool
•
Torque wrench with 8mm hex bit
• Grease
1. Press in the drive-side bearing (3).
2. Insert the sleeve (4) from the non-drive side.
3. Press in the non-drive-side bearing (3).
4.
Position the chainstay over the seat tube, ensuring
that the main pivot holes are aligned.
Tip:
Slide the long arm of the hex tool from the non-
drive-side and through the aligned pivot holes. For
each step, slide the component onto the hex tool to
align the components on each side of the main pivot.
5.
Apply grease to the shoulder of the main pivot
bolt (5).
6.
Insert the drive-side washer (2) between the bearing
the chainstay.
7.
Partially insert the main pivot bolt (5) from the drive
side.
8.
Insert the non-drive-side washer (2) between the
bearing and the chainstay.
9. Fully insert the main pivot bolt (5).
10. Install the nut (1).
11. Torque the main pivot bolt (5) to 30 Nm.
