2021 E-Caliber Service Manual
7
Dérailleur hanger
1
2
Item Description
Quantity in
Assembly
Part Number
Torque (Nm)
1
Thru axle, M12X1.0X15 MM
1
W600321
10
2
Dérailleur hanger
1
W600660
—
Hanger bolt, left-handed thread
1
25
Washer, 25mm
1
—
This bicycle frame is designed to use a Universal Derailleur
Hanger (UDH).
NOTICE:
The thru axle must be compatible with a UDH
and must be M12x1.0 with a 12.7 mm thread.
NOTICE:
The washer is frame-specific. Install only the
washer compatible with your frame.
WARNING
Do not apply grease to the derailleur hanger or bolt. Only
apply grease to the thru axle.
1.
Insert the hanger on the inside of the drive-side
chainstay.
2. Install the washer on the derailleur hanger bolt.
3. Insert the bolt into the frame.
4. Make sure the hanger is positioned as shown below.
5. Torque the hanger bolt to 25 Nm.
NOTICE:
Do not over-tighten. Over-tightening the bolt
could cause the hanger to break.
For additional information about the UDH, refer to the
SRAM user manual at
