TRBOnet Swift DT500, User Manual

Page: 5 / 22

2 TRBOnet Swift DT500 – User Guide
2 About Swift DT500
TRBOnet Swift DT500 is an external programmable controller connectable to a
MOTOTRBO digital two-way radio.
2.1 Advantages
• Small size and weight
•
High-performance processor
•
Built-in memory (8 Mb)
• Interfaces that allow various connections:

7 VIO contacts (active level GND, up to 200 mA per contact)

Serial ports RS232 and RS485

USB port for a MOTOTRBO radio or a computer
• Support for MOTOTRBO 3000/4000 series digital two-way mobile radios
•
Quick and easy connection and setup
•
Programmable via USB (RJ45)
• Configurable Swift Event Logic on board
2.2 Functionality
Swift DT500 supports the following operations:
•
Receives events and data from external devices

Receives GNSS coordinates from the radio’s built-in navigation tracker.

Handles region events (region entered, left, region border crossed) from the
radio’s built-in navigation tracker.
• Controls a connected MOTOTRBO radio

Sends a MOTOTRBO alarm (with the indicated event).

Sets a different zone and a channel on the radio.

Manages the volume of the tone played back on the radio

Plays back the tones on the radio.

Plays back voice messages on the radio (messages are preconfigured in
MOTOTRBO CPS).

Sends text messages to other radios and talk groups.

Shows predefined text on the radio’s display.
• Controls internal functions

Stores GNSS and other data in memory.

Creates and sends GNSS and other reports on the radio channel.

At runtime, sets parameters for creating and sending reports.

Controls the VIO contacts located on the rear panel.
•
Receives internal events

Registers an event when powered on/off and at change of a VIO contact
state.

Receives and transmits data on the RS-232 and RS-485 ports.