12
TRBOnet Swift DT500 – User Guide
Note: TRBOnet Swift CPS needs to be installed on your computer prior to installing
the driver. Refer to
Installing Software
for details.
To install the driver:
1.
If you are running a 64-bit version of Windows, disable the driver signature
enforcement in any preferred way. This is necessary because the provided
driver is not signed.
For instance, you can restart Windows with the S
HIFT
key pressed. At the boot
prompt, select the
Disable driver signature enforcement
option or keep F7
pressed.
3.
Go to the Swift CPS installation folder and open the
Driver
folder located
inside. Right-click the
swift-vcom.inf
file and select
Install
from the context
menu.
4.
(Optional) If the warning window is displayed, select to install the driver
anyway and complete the installation.
4.3
Updating Firmware
The firmware version loaded to your Swift DT500 may require an update. The Swift
CPS software provides the latest firmware version for Swift DT500.
Note: Firmware update clears configuration from device memory. We recommend
that you save the current configuration to a file before updating firmware on
your device. Information about activated features is not affected by firmware
update.
To load the latest firmware on Swift DT500:
1.
Connect Swift DT500 to a computer.
2.
Launch the Swift CPS application. If you need to install this software, refer to
Installing Software
for details.
Swift CPS automatically detects the connected device and shows the
information about detected connections in the status bar.
Note: If Swift CPS fails to detect a connected DT500, make sure that you have
installed the USB driver as described in
Installing a Driver
.
3.
Select
Update
in the
Device
menu.
The
Firmware Update
window displays the actual firmware version for each
connected device in section
Info about device
. The latest available firmware
version appears in the
Firmware
section.
