16
TRBOnet Swift DT500 – User Guide
To open the configuration from another device connected to your computer,
select
Read
in the
Device
menu. Select the configured device and confirm
the choice.
The configuration appears in a separate tab.
4.
Select
Write
in the
Device
menu. If multiple devices are connected to your
computer, select your Swift DT500 and confirm the choice.
The configuration from the opened tab is loaded to your Swift DT500.
5.
To verify the result, select
Read
in the
Device
menu. If necessary, select the
just configured Swift DT500 and confirm the choice.
The current configuration of your Swift DT500 appears in the
DT500 - COM3
tab.
4.5.2
Loading an Extended Configuration
An extended configuration includes configuration settings not supported by the Swift
CPS software. For this reason, you cannot open an extended configuration in Swift
CPS using commands
Open File
and
Read
.
To load an extended configuration to Swift DT500:
1.
Connect Swift DT500 to the USB port of your computer.
2.
Launch the Swift CPS application.
3.
Select
Write logic to device
in the
Device
menu. Select the configuration file
provided by the manufacturer of your device and confirm the choice.
