www.traxontechnologies.com
©2020 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
IG0108EN V0.1 08/20
P. 20 of 29
CAUTION
Ensure that the mounting surface and hardware are suitable for the luminaire weight.
Final Installation
NOTE
For ease of installation and Safety, the following step may require 2 people to
perform. This is largely dependent on the location/orientation of the junction
box and the size of the fixture being mounted. All installers should refer to their
occupational safety and best practice guidelines when performing these tasks.
•
Install the luminaire onto the mounting bracket and secure the set screws and lock nuts.
CAUTION
Ensure that the power and data cabling is routed so that the luminaire mounting
interface does not crush the power and/or data cable jacketing.
•
Tighten both set screws so that each screw engages securely in the surface mount bracket groove.
CAUTION
Both set screws must engage within the groove. Failure of the set screws to engage
the groove could result in the luminaire separating from the surface mount bracket.
•
Tighten both lock nuts over the set screws. Grasp the luminaire body and rotate it back and forth on
the mounting bracket to ensure that the fixture is securely fastened.
CAUTION
Do not rotate the luminaire more than 180 degrees. Rotating more than 180 degrees
may cause the power and/or data cables to bind inside the unit resulting in damage.
