www.traxontechnologies.com
©2020 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
IG0108EN V0.1 08/20
P. 14 of 29
•
After aligning 4
φ
13mm holes and expansion screws on the floor of the stainless steel mounting bracket, lock
the mounting bracket.
FIG.11: Surface Mounting Step 2
•
Loosen the adjusting bolts with 17mm Hex Key, adjust the overall angle of the luminaire and tighten
the adjusting bolts.
•
Loosen the adjusting bolts with 14mm Hex Key, adjust the single-head exposure angle and tighten
the adjusting bolts.
CAUTION
Do not rotate the luminaire more than 180 degrees. Rotating more than 180 degrees
may cause the power and/or data cables to bind inside the unit resulting in damage.
FIG.12: Surface Mounting Step 3
A 17mm hex key can be used on the center adjustment bolt to
enable you to change the angle of the fixture.
A 14mm hex key can be used on the outer
adjustment bolts to enable you to change the
angle of the individual heads.
