background image

www.traxontechnologies.com

©2020 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS 
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

 IG0108EN V0.1 08/20

P. 10 of 29

1.4  Packing Contents

FIG.6:  Packing Contents

1 x ProPoint Vista (size/model based on order)

1.5  Component Overview

Luminaire Options

The ProPoint Vista luminaire is available in the following sizes:

Model

Weight

Power Consumption 

(Nominal)

Power 

Factor

Input Voltage 

Range

Operating 

Temperature

Minimum Starting 

Temperature

200W

22.3kg 

(49.2 lbs.)

200W

≥0.9

120-277VAC 

50/60 Hz

-30°C to +55°C 

(-22°F to +131°F) 

-20°C (-4°F)

400W

45.5kg 

(100.3 lbs.)

400W

The ProPoint Vista luminaire is available with the following optical engines:

Model

Optical Engine

Lens Options

DMX Control 
Channels

Color Temperature

200W

Color Changing 
(RGBW)

3° native; 5°, 8°, 10°, 
15°, 20°, 30°, 40°, 55°, 
80°, 50°x10°, 50°x5° via 
accessory  Internal Louver 
(Standard)

4

RGBW (White CCT: 4000K standard) 
Other White CCT and RGBA available

Static White + Color 
(SW + Color)

1

3000K / 4000K      
2700K, 3500K, 5000K, 6500K, Red, 
Green, Blue, Amber available

400W

Color Changing 
(RGBW)

4

RGBW (White CCT: 4000K standard) 
Other White CCT and RGBA available

Static White + Color 
(SW + Color)

1

3000K / 4000K
2700K, 3500K, 5000K, 6500K, Red, 
Green, Blue, Amber available

Summary of Contents for ProPoint Vista 200W RGBW






























Reviews: