Traxon Allegro Dot M/L Diffused View Installation Manual Download Page 10 | Manualshive

Page: 10 / 23

Traxon Allegro Dot M/L Diffused View Installation Manual Download Page 10

www.traxontechnologies.com

©2019 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

12/19 V2.0

10 of 23

Connector should be properly connected with cable connectors and the DATA OUT of the
last Pixel Distributor should be covered by its Waterproof End Cap to ensure IP66/67 rating.

FIG.8: Seal last Pixel Distributor with Waterproof End Cap

Waterproof End Cap

Tightening Torque
0.49~0.69Nm (5~7kgfcm)

2.2.2

Handling The Allegro Dot M/L String

When transporting or preparing the Allegro Dot M/L string, please handle with care. To reduce
stress on cables, carry by the Allegro Dots and not the cable during transit.

FIG.9: Correct way of handling Allegro Dot M/L String

Allow slack on cable to

reduce stress

Allow slack on cable to

reduce stress

«
...
8
9
10
11
12
...
»

Summary of Contents for Allegro Dot M/L Diffused View
























Reviews:

No comments