TRAX RetroWave Owner’s Manual
< 3 >
PLEASE READ CAREFULLY
Please keep these instructions handy for future reference.
Follow all safety instructions, as these guarantee correct operation of the apparatus.
Do not use this apparatus near water, or allow exposure to drips or splashes.
Use a soft dry cloth for cleaning, or a soft cloth lightly moistened with a mild detergent. Do not use
abrasive cleaners, as these may damage the finish of the front panel or paintwork.
Do not use the unit near any heat sources such as radiators, stoves, or other equipment that produces
heat. Keep the top of the unit free to ensure proper ventilation.
Never place objects on top of the control panel, as this could damage the printed circuit board and/or the
controls.
Unplug the mains power supply when the unit is not to be used for a long period.
Servicing is required when the unit has been damaged through liquid spillage, exposure to rain or
moisture, ingress of conducting foreign bodies, or the unit has been dropped. Do not open the case of
the R-1, or attempt to repair the unit - there are no user serviceable parts inside. Opening up the unit
may invalidate the guarantee. Please refer all servicing to Trax Controls, who offer after sales service at
reasonable rates – see the
Guarantee and
Service Information
page.
Do not place any objects filled with liquids, such as vases, on the apparatus.
Do not install the apparatus in a confined space such as a book case or similar.
Never use the R-1 in the immediate vicinity of equipment that emits electromagnetic radiation, such as
monitors, computers, and power units.
The adapter draws a small amount of current from the ac outlet, with the R-1’s power switch in the OFF
position. It will run warm when connected to the mains supply – this is normal.
If the unit needs to be returned for servicing, updating or inspection, the original packaging must be
used. Please retain all packaging materials for future use.
Please ensure that the unit is located in a safe position for operation and storage. Dropping the unit onto
a hard surface can damage the casing and internal parts, and could also cause injury.
Important Safety Instructions
