Planning Mode
After launching CoPilot you can access Planning Mode by clicking the
Planning Mode
button from the welcome screen or the
Planning
button in the Passenger screen. In
Planning Mode you can run trips on your desktop to print and take with you or save for a
later time, search for points of interest, add favorite places, edit street restrictions, add
custom places, and much more. For additional information on Planning Mode see CoPilots
Help files (select
Help Contents and Search
from the
Help
menu).
The Trip Planner Window
To access the Trip Planner window use either the
New Trip
button on the tool bar, or select
New Trip
from the drop-down
Trip
menu.
Cities and Addresses
To enter a trip, begin by typing the name of the place where your trip will start or type a ZIP
code in the
City, State or ZIP Code
box, then press the
<Enter>
key (e.g.
princeton, nj
).
Do not include periods in the state abbreviation. A list of matches to your entry may appear;
if so, highlight the one you want on the list and click
Select
.
NOTE:
If an exact match is not found, CoPilot will open a window with a list of possible
matches. Highlight the one you want and click
Select
.
You can enter a street address by clicking in the
Address
box. (This is not required. If no
street address is entered, CoPilot 2003 will route from a point at the center of the city or
- 28 -
