6.
Start Application:
Double-click on the CoPilot 2003 icon on your desktop. If your
GPS receiver is plugged in the first time you start the program, you will be greeted
and asked to enter a nearby city for the initial satellite search. A dialog box will
then appear with a variety of options for entering your destination. Click on any
button to enter that type of destination. After just a few seconds, CoPilot will
generate a route for you highlighted in green on the map. This is the
recommended route to your destination.
7.
Start Driving:
Start driving and listen for CoPilots spoken instructions.
Additional Tips:
From the Navigation Control Panel (on the right side of the Passenger screen in
Guidance Mode), you can activate various features.
NOTE:
In the
Passenger screen
, your map will always be shown. In the
Driver
Safety screen
, your map will not be shown when you drive at more than 10 m.p.h.;
however, you will still receive verbal instructions as well as simple printed
directions on-screen.
The driver should pull over to the side of the road when
looking at the map and/or the Navigation Control Panel.
Even if a passenger
operates the computer, for safety reasons,
the driver should never look at the
computer screen while driving.
If you happen to go off route, CoPilot will automatically give you new
directions. While this may take a few seconds, continue driving as CoPilot updates
your directions.
You must disable your screen saver before using CoPilot. In the
Start
menu
go to
Settings
,
Control Panel
, double-click on the
Display
icon, and select the
Screen Saver
tab. To deactivate the screen saver go to the drop-down bar and
select
(None)
.