- 7 -
To Uninstall Data From Previous Versions of CoPilot:
1.
Exit out of any other programs that are running.
2.
On your desktop, double-click on
My Computer
.
3.
Double-click on
Control Panel
.
4.
Double-click on
Add/Remove Programs
.
5.
Scroll down the list of applications until you see
CoPilot 2001 Data CD
or
Data
CD setup for CoPilot 2000
. Click on it to highlight it, then click on the
Add/Remove
button. You will then be asked Are you sure you want to
completely remove the selected application and all of its components?
Click
Yes
. This will start the uninstall process. If prompted to remove all shared
files
select
No to All.
6.
When this is finished, click on
Finish
.
Then restart your computer.
NOTE:
Data is automatically removed as part of the CoPilot 2002 or 2003 uninstall.
This process is only required if you are uninstalling an earlier edition of CoPilot.
Setting Up the Hardware
The first time you use your GPS receiver CoPilot will ask you to enter a city and state to
speed up the initial GPS acquistion. This may take up to 15 minutes. After you use it once,
the receiver should initialize within a few minutes.
After the first time you use your GPS receiver, CoPilot may prompt you again to enter a city
and state if its been more than two hours since your last satellite fix.
The GPS receiver works like a radio antenna, so place it at least two feet away from
possible sources of interference (for instance, a cellular phone antenna).
See page 8 for a diagram detailing how to set up a
USB receiver
. See page 9 for a diagram
detailing how to set up a
Serial receiver
.