CoPilot
®
2003 Quick Start
If you're in a hurry to begin using CoPilot 2003:
1.
Install Application:
Boot up your computer. After Windows
®
(98, NT
®
, 2000,
ME
®
, XP) has finished booting up, install CoPilot 2003 by placing the
Install Disk
into your CD-ROM drive. (If the Installation menu does not automatically appear,
see
Installation
on page 5).
NOTE:
You must uninstall any previous versions of CoPilot before installing
CoPilot 2003.
2.
Install Speech:
During CoPilot installation, you will be prompted to install
speech software. Click
OK
and follow the on-screen instructions.
NOTE:
You must install speech to enable CoPilot's two-way voice technology.
3.
Install Data:
You can install the entire US map database, which requires about 700
MB of space, to your hard drive.
4.
Attach GPS Receiver:
Plug the GPS receiver into your laptop (see page 8-9).
Serial:
If you are using a GPS receiver with a serial connection, attach the
receiver to both the
serial
port and the
PS/2
port.
USB:
If you are using a receiver with a USB connection simply plug the
receiver into the USB port.
5.
Verify Computer Settings:
Make sure the date and time are set correctly on your
computer. This is extremely important for CoPilot to function properly. To
check and/or change the date and time, go to the Windows
Start
button,
Settings
,
Control Panel
,
Date/Time
.